-15-
Suction Duct Installation
A suction duct or hose is not supplied with the unit. It must be obtained locally or purchased separately by
the user.
NOTE: Use a duct that matches the size of the inlet.
Machine model
MJ-5
MJ-10
MJ-15
MJ-25
Inlet outer diam. (mm)
φ98
φ123
φ148
φ198
Nominal duct diam. (mm)
φ100
φ125
φ150
φ200
1
Duct Material
The use of oil-resistant duct or hose, which resists hardening by lubrication oil or cutting oil, is
recommended.
2
Duct Installation
Place a duct (or hose) into the inlet, and use a hose clamp to secure it in place.
Example: Kanaflex Corporation
oil-resistant duct
Hose clamp
Cuff
Duct / Hose
To prevent oil from leaking, apply a caulking material inside the cuff before installing the duct.
Inlet