Pega 367 with Fanuc 04PC User Pre-installation Guide
©Amada America, Inc.
Print Date 03/07/2001 Revision 4.0
This document available on the World Wide Web at http://www.amada.com
Page 11 of 35
Installing the Electrical Power Supply
The Pega 367 requires one electrical power source supplied to the Fanuc 04PC. The Pega 367 should be supplied from a
power line separate from those for welding machines or other machines that produce electrical noise.
!
The Pega 367 electrical inlet is 64" above floor level at the left side of the Fanuc 04PC control.
!
For the location of required electrical supplies for optional equipment, please see the installation guides for the specific
equipment.
Pega 367 left side of electrical enclosure
Pega 367 main power conection inside of electrical enclosure
