MG3 Hot Bar
How to …?
76609576EN-MG3-HB-V1_0a.docx 31/49
PART RECOGNITION
When enabled (ON/OFF), the part detection is active.
MIN/MAX
Set the minimum or maximum value for the part detection monitoring.
If both values are zero, the part detection monitoring is disabled.
MEASURING MODE
Select the measuring mode for the part detection.
absolute
measures the way the welding head actually covers.
reference
the distance between both electrodes is determined.
Note: reference
should only be used with part detection.
REFERENCE MEASURING
Enabling the button will start the reference measuring.
If the reference measuring is completed, disable the button. Now the
determined reference value is shown right beside the button.
To avoid damage to electrodes and welding installation, a reference run has
to be done:
prior to first measurement
after any change on the electrodes
after any change on the welding head
Caution