Alvarion BreezeMAX Si 4000 CPE, User Manual

Page: 88 / 135

Chapter 7 - Setting Advanced Parameters Authentication
BreezeMAX Si 4000 CPE 72 User Manual

Authentication Method - Select one of the following WiMAX security
methods:
»
None - Authentication is disabled
»
EAP-TTLS-MSCHAPV2 (Default) - EAP-Tunneled Transport Layer Security,
supporting the Microsoft version of the Challenge-handshake
authentication protocol, version 2.
»
EAP TLS - EAP-Transport Layer Security (available only if enabled by the
operator)
When Authentication is enabled, set the following parameters:

User Name - Enter the user name supplied by the service provider (Default:
wan mac address@WiMax.com, e.g. 0026824EE12C@WiMax.com).

Password - Enter the user password supplied by the service provider). Default:
quickynikynyoky

Password Confirmation - Re-enter the user password to confirm it.