Alvarion BreezeMAX Si 4000 CPE, User Manual

Page: 59 / 135

Chapter 4 - Configuring Setup Parameters Introduction
BreezeMAX Si 4000 CPE 43 User Manual
4.1 Introduction
The BreezeMAX Si 4000’s Setup menu allows you to implement general
management functions for the unit, including setting connection modes, the
system time zone, configuring the device name and access password, and restore
settings to factory defaults.
When you make a configuration change in the Setup pages, the following message
is displayed after clicking Apply: “Configuration setting”. After the configuration is
applied, a “Prepare for Reboot” message is displayed. The system performs a
reboot and counts 60 seconds.
When applying Factory Defaults, a Rebooting message and the 60 seconds
countdown are displayed.
NOTE
You can use the web browser interface to access the WAN IP address only if the BreezeMAX Si 4000
already has an IP address that is reachable through your network.
The default IP address of the BreezeMAX Si 4000is 192.168.254.251. The unit operates by default in
DHCP mode.