Alvarion BreezeMAX Si 4000 CPE, User Manual

Page: 105 / 135

Chapter 8 - Displaying Status Details Device Status
BreezeMAX Si 4000 CPE 89 User Manual
IP Address WAN IP address, if the Static connection mode was selected,
as defined in
“Setting Basic Parameters” on page 44
.
For DHCP mode - IP address acquired on the WAN interface
is displayed. Otherwise it is 0.0.0.0
MAC WAN MAC Address
IP Subnet Mask The IP subnet mask, if the Static connection mode was
selected, as defined in
“Setting Basic Parameters” on
page 44
, For DHCP mode - IP Subnet Mask acquired on the
WAN interface is displayed. Otherwise it is 0.0.0.0
IP Default Gateway The IP Default Gateway, if the Static connection mode was
selected, as defined in
“Setting Basic Parameters” on
page 44
. For DHCP mode - IP Default Gateway acquired on
the WAN interface is displayed. Otherwise it is 0.0.0.0
IP Default Connection IP is connected to the network (On/Off)
Firewall Firewall enabled or disabled (on/off), as set in
“Firewall” on
page 75
.
Lease Obtained-Data Date of obtaining the device leasing.
Lease Expires-Data Date of device leasing expiration.
DNS Server The Domain Name Server address
Time Server The NTP (Network Time Protocol) server address
Device Up Time Duration of device function (xdays yhours zminutes)
Device Restart Reason The reason for last device reboot (e.g. Software Upgrade)
Serving BSID Base Station ID number (e.g. 00:01:21:00:03:5A)
RSSI Currently received signal strength indication (e.g. 78 dBm)
CINR Carrier to Interference-plus-Noise Ratio [in decibels (dB)] (e.g.
13 dB). This value should be maximized for best signal quality.
Table 8-1: Device Status Parameters (Continued)
Item Description