Alvarion BreezeMAX Si 4000 CPE, User Manual

Page: 81 / 135

Chapter 6 - Configuring Local Address Parameters DHCP Server
BreezeMAX Si 4000 CPE 65 User Manual
6.2 DHCP Server
The unit has a built-in DHCP server that can be used for managing the
distribution of IP addresses for the devices connected to the local Ethernet ports
and WiFi access point. In the DHCP Server page you set DHCP parameters for
dynamic IP assignment.

Enable DHCP Server - Select this check-box dynamically assign a leased IP
address to clients that connect to the device from the local network. This
option is applicable to IP CS modes only. For Bridge IPCS and Bridge ETHCS
this option is disabled.

DHCP Server IP Address - Enter a DHCP server IP address. The default
address is 192.168.254.251.

DHCP Starting IP Address - Enter the first IP address assigned by the DHCP
server. The default address is 192.168.254.1.

DHCP Ending IP Address - Enter the last IP address assigned by the DHCP
server. The default address is 192.168.254.5.

DHCP Lease Time - Set the time for renewing the IP Lease. Default: 1 hour.
Figure 6-1: DHCP Server