Alvarion BreezeMAX Si 4000 CPE, User Manual

Page: 47 / 135

Chapter 3 - Commissioning Introduction
BreezeMAX Si 4000 CPE 31 User Manual
3.1 Introduction
After completing the installation process, as described in the preceding chapter,
several actions should be performed to ensure connectivity with a base station
(BS) and provisioning of services. After the subscriber unit is connected with a BS,
it can be fully managed via the wireless link:
1
The basic parameters must be configured to ensure that the unit operates
correctly and can communicate with a BS.
2
Proper operation should be verified, including data connectivity.
3
The unit must be positioned correctly to ensure optimal performance of the
wireless link.
The following methods are available for configuring the BreezeMAX Si 4000:

The web-based management interface - accessed using a PC/Notebook with a
web browser (see
“Configuring the CPE Using the Web Management Interface”
on page 33 ).

An automatic configuration tool provided on a CDROM for the subscribers (see
“Configuring the CPE Using the WiMAX Modem Application CD” on page 36 ).

Upgrading the CPE using an auto-configuration file, or IPKG (in *.ipk format)
(see “Operation Verification” on page 40 ).
The device may be delivered with the operator’s default settings already configured
in the FLASH memory.
The following parameters must be configured in order for a link to be established.
Table 3-1: Basic Parameters
Item Default Value Comment
User Name (WiMAX) WAN mac address and WiMax.com
realm, e.g:
0026824EE12C@WiMax.com
Should be supplied by system
administrator. Configured in the
Advanced> Authentication window
WiMAX Password quickynikynyoky
Domain wimax.com

(also Eng > WiMAX Config > Realm
Frequency Full Scan Should be supplied by system
administrator.