Alvarion BreezeMAX Si 4000 CPE, User Manual

Page: 67 / 135

Chapter 4 - Configuring Setup Parameters Restore to Factory Default Configuration
BreezeMAX Si 4000 CPE 51 User Manual
4.6 Restore to Factory Default Configuration
This page resets the unit to its factory default settings. When returning to factory
defaults, the default configuration file (IPKG) is reloaded, resetting all the
parameters to those defined in this file.
All the changes from the default factory settings will be lost, including voice and
WiFi settings. Essential Voice service settings will be restored automatically
within a short period of time by the network once the device is operational after
the reboot. However, you will not be able to make and receive calls until the voice
line LED is lit on the front panel. You will need to manually restore any parameter
changes, such as WiFi SSID and security settings, and voice settings that you
made, since these settings will not exist after the unit reboots following the default
restoration.
To restore settings to factory defaults, select the checkbox on this page and click
Apply to confirm the action. After applying factory defaults, the unit reboots.
IMPORTANT
Do not change parameters in this page unless specifically instructed by your service provider.
Figure 4-5: Setup - Restore to Factory Warning