Alvarion BreezeACCESS II CX, System Manual

Page: 40 / 78

Chapter 2 - Installation
Connecting the Cables
To connect the ground cable:
1. Connect one end of a grounding cable to the ground terminal and
tighten the ground screw firmly.
2. Connect the other end of the ground cable to a ground connection.
To connect the IF cable (900 MHz and 2.4 GHz equipment):
1. Connect one end of the coaxial IF cable to the IF connector on the
bottom panel of the unit
2. Verify that the length of the IF cable is sufficient to reach the
Interface Unit.
3. The IF cable connectors should be sealed properly to protect against
rain and moisture.
Figure 2-3: SU-RA-2.4 Bottom Panel
Figure 2-4: AU-RE-2.4, AU-RE-900 Bottom Panel
Cell Extender System Manual
2-10