Alvarion BreezeACCESS II CX, System Manual

Page: 63 / 78

Configuring Basic Parameters
Table 3-5: Basic Parameters in BreezeACCESS VL SU
Parameter Default Value Comment
Maximum Tx Power for Modulation
Levels 1 to 5
Maximum Tx Power for Modulation
Level 6
Maximum Tx Power for Modulation
Level 7
Maximum Tx Power for Modulation
pend on HW revisio
d
er cannot be
higher than the upper
limit according to the Sub
Band in use.
Level 8
De n Max Tx Pow
and Sub Ban
Antenna Gain (units with external cording to the anten a
pplied with the unit and
the Sub Band.
If set to “Not Set Yet”,
must be configured
according to actual value,
taking into account
cable’s attenuation.
antenna)
Ac n
su
ATPC Option Enable
Best AU Sup Disable port
Preferred AU MAC Address 00-00-00-00-00-00 (none) Applicable only when
Best AU Support is
enabled
VLAN Link Type Hybrid
VLAN ID-Management 65535
Authentication Algorithm Open System
Data Encryption Option Disable
Security Mode WEP
Default Key Key 1
Key 1 to Key 4 00……0 (32 zeros,
meaning no key)
Availability of security
parameters depends on
support according to the
country code.
NOTE
Once the basic parameters are configured, the unit must be reset in order to activate the
new configuration.
Manual Revision 1.0
3-13