Alvarion BreezeACCESS II CX, System Manual

Page: 57 / 78

Configuring Basic Parameters
Table 3-3: Basic Parameters in 2.4 GHz Units
Parameter Default Value Comment
ESSID ESSID1 The ESSID of the SU
module must be the
same as the ESSID of
. A
must be
configured in the AU
the Base Station AU.
In CX-BA2.4-BA-2.4 DO
NOT configure the ESSID
of the SU with the
Operator ESSID
different ESSID
module.
Operator ES U) Enable SID Option (A
Operator ESSID (AU) ESSID1 Modify this parameter to
the same Operator
ESSID of the other AUs.
If you are not using this
parameter, where the
Operator ESSID Option is
disabled, change the
value to something other
than the default.
Hopping Set (AU) Not applicable if HDM
Mode is ensbled.
In CX-BA2.4-BA-2.4,
must be the same as
configured for the Base
Station AU.
Hopping Sequence (AU) Not applicable if HDM
Mode is ensbled.
In CX-BA2.4-BA-2.4,
must differ from the
Hopping Sequence
configured for the Base
Station AU
HDM Mode (AU) Disable Applicable only to US
FCC hopping standard.
Manual Revision 1.0
3-7