WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementSystem
Chapter 3 - Base Station Management
System
48
SNMP V2c Read Password
: The SNMPv2c community string used for read (get) operations. The
default is public.
SNMP V2c Write Password
: The community string used for write (put) operations. Can also be used
for read (get) operations. The default is private.
SNMP V3 Username
: The name assigned to the SNMPv3 user for authentication purposes. The
default is admin.
SNMP V3 Auth Algorithm
: Read-only. The authentication algorithm used, e.g., MD5.
SNMP V3 Auth Password
: The password for user authentication (default: password). You can click
on the
Reveal/hide password
icon (
) on the right side to hide (the default) or reveal the typed
string.
SNMP V3 Privacy Algorithm
: Read-only. The data encryption algorithm used, e.g., DES.
SNMP V3 Privacy Password
: The password for data encryption (default: password). You can click on
the
Reveal/hide password
icon (
) on the right side to hide (the default) or reveal the typed string.
3.3.4.2.2
Trap
The Trap tab includes the following parameters:
Enable SNMP Trap
: Select (the default) to enable the SNMP agent to send events notifications to the
SNMP Trap manager.
SNMP Trap IP Address
: The IP address of the SNMP Trap manager which receives the trap messages.
SNMP Trap Port
: The SNMP Traps port number (default is 162).
3.3.5
Backup / Flash Firmware Page
To access the Backup / Flash Firmware page click on the
System>Backup / Flash Firmware
tab in the
management function selection panel.
The Backup / Flash Firmware page includes the following sections:
Figure 3-30: System SNMP Page, SNMP Configuration Section, Trap Tab
