Alvarion 43222600, System Manual

Page: 33 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementUsing the Web-Based Element Management System
Chapter 3 - Base Station Management Using the Web-Based Element Management System
23
„
System : Enables viewing/modifying the unit's general parameters. See “System” on page 40 .
„
Services : Enables viewing/modifying various parameters that control hotspot services that may
optionally be provided by the unit. See “Services” on page 53 .
„
Network : Enables viewing/modifying various parameters that control the networking functionality of
the unit such as WAN and LAN interfaces, Wifi radios and wireless networks, VLANs and Passpoint
profiles. See “Network” on page 61 .
„
APController : Enables viewing/modifying parameters for supporting remote management of the
unit by the Arena controller. See “APController” on page 101 .
„
Statistics : Enables viewing statistics for a variety of performance and status indicators. See
“Statistics” on page 103 .
„
Logout : Click on the Logout tab to logout from the management utility.
Click on a management function tab (excluding the Logout tab) to view the second-level tabs allowing
selection of specific status/management pages and open the page for the first second-level tab.
Third-level tabs are available for certain second-level tabs.
3.1.2.3 Work Area
The work area displays the relevant parameters according to the selection in the management function
panel, allowing a user to view current status/configuration of relevant parameters and to modify the
configuration of relevant parameters (if applicable for the selected page).
„
Parameter’s Configuration methods
„
Managing Configurable Lists
„
Saving/Applying Changes
3.1.2.3.1 Parameter’s Configuration methods
The following methods for selecting the required value for configurable parameters are common to
most configuration pages:
„
Drop-down List: Parameters with several value options are configured using drop-down list that
include the available options. To configure these parameters, click on the drop-down arrow on the
right side of the configuration field and select the required option from the drop-down list.
„
Text Field: Parameters that are defined using a string of characters are configured using a text field. To
change the setting, mark the current settings and enter the new string. Note that most parameters
require a certain format (such as IP address) or are subject to certain limitations such as maximum
string length.
„
Checkbox: Used for either selecting/deselecting an instance or for enabling/disabling a
feature/option.