WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementStatus
Chapter 3 - Base Station Management
Status
30
Uptime
MAC Address
: The MAC address of the network’s interface. Not applicable for the l2tp
(AVLAN3316) network.
Protocol
: The method used for setting the IP address (static or dhcp). For the AVLAN3316 interface
the protocol is l2tp.
RX
: The accumulated numbers for received Bytes and Packets.
TX
: The accumulated numbers for transmitted Bytes and Packets.
IPv4
: The IP address and prefix mask.
The icons in parenthesis below the interface name provide indication regarding the Ethernet and
wireless networks associated with the network:
The Ethernet icon (
) provides a visible indication on the total number of Ethernet interfaces assigned
to any network (In addition to eth0 assigned to either the LAN or the WAN zone, an Ethernet interface
named eth0.<VLAN_ID> is assigned to any configured VLAN).
A wireless network icon (
) is displayed for each wireless network assigned to the network.
Hover with the mouse over an icon to open an infotip with the name of the relevant Ethernet/wireless
network it represents.
3.2.1.6
Wireless
A suitable icon on the left side indicates the mode/status of each of the available radio cards:
Figure 3-10: Status Overview Page, Wireless Section
