Alvarion 43222600, System Manual

Page: 59 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementSystem
Chapter 3 - Base Station Management System
49
„
Firmware Banks
3.3.5.1 Backup / Restore
In the Backup / Restore section you can execute the following actions related to management of
configuration files:
„
Saving the current configuration file
„
Restoring the factory default configuration
„
Restoring a previously saved configuration file
3.3.5.1.1 Saving the current configuration file
Click on the Generate archive button.
The backup file will be downloaded to your PC (either to the Downloads directory or to a selectable
location - depending on the browser used). The default file name is “backup-AP-<Date>.tar”.
3.3.5.1.2 Restoring the factory default configuration
Click on the Perform reset button.
A confirmation request message will be displayed. After confirmation the device will reboot and restart
running with the default configuration.
Figure 3-31: System Backup / Flash Firmware Page, Backup / Restore Section
To generate and download a tar archive of the current configuration files:
To revert to the factory default configuration: