manualshive.com logo in svg

Aluvision Hi-LED 55, Manual

Share
Download
Aluvision Hi-LED 55 Manual Download Page 8

09

ALUVISION > Clemence Dosschestraat 44 > 9800 Deinze, Belgium > T: +32 (0)9 381 54 70 > [email protected] > www.aluvision.com

01.7  Media device

A media device is required to play content on your LED display. You can use any media device you want:  
PC/laptop, DVD/Blu-ray player, game console… or you can use a media player such as a ’

BrightSign

’ 

device. BrightSign LS424 (HD) is recommended by Aluvision. For 4K support, BrightSign HD224 is available.

The media device should be connected to the Novastar controller using an HDMI or an HDMI to DVI cable 
(only with Novastar MCTRL300).

01.8  Corners, cubes and curves

Aluvision offers, next to the regular flat tiles, also corners, cubes and curves. All can be integrated  
seamlessly in the original Aluvision frame system.

• 

Hi-LED 2D corner

 

− 2 sides closed

• 

Hi-LED 3D corner

 

− 3 sides closed

• 

Hi-LED cube

 

− 5 sides closed

Each side of a corner/cube consists out of 

4 replaceable LED modules

 with beveled corners wich are 

powered by the same kind of power boxes as the regular flat Hi-LED tiles. Each side consists out of 176 
x 176 (Pitch 2.8) or 192 x 192 pixels (Pitch 2.5). The viewing angle (horizontal: 140° - vertical: 120°) 
and power consumption (MAX 590W/m² (2.8), 610W/m² (2.5) – AVG 197 W/m² (2.8), 203 W/m² (2.5)) 
remain the same as for a regular Hi-LED. 

Cabling and configuring a corner/cube works the same way as for the regular Hi-LED’s. Handle each  
side as a different cabinet.

Summary of Contents for Hi-LED 55




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands