manualshive.com logo in svg

Aluvision Hi-LED 55, Manual

Share
Download
Aluvision Hi-LED 55 Manual Download Page 44

45

ALUVISION > Clemence Dosschestraat 44 > 9800 Deinze, Belgium > T: +32 (0)9 381 54 70 > [email protected] > www.aluvision.com

Set the amount of columns (3) and rows (1) and also set the

 ‘Receiving Card Size’ 

(resolution) of the first 

cabinet in the data flow. In this example the data flow runs from left to right, meaning the first cabinet is an 
inner curve, the width is 266 pixels, the height 192 pixels. Assign this resolution to the first cabinet from 
the left by clicking it. 

Next, click the second cabinet. It also gets assigned with the resolution that was set, but since the second 
cabinet is a flat Hi-LED, the width should be adapted to 192 pixels. Click the third and last cabinet, again 
it gets assigned with the resolution already set (192 x 192). To change this, adapt the width to 300 pixels 
with the cabinet still selected.

Send the configuration to the controller and save it by clicking ‘

Send to HW

’ and ‘

Save

’. The video plays 

properly now.

Summary of Contents for Hi-LED 55




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands