Altusen KL9108 Page 98 User Manual Download

Page: 98 / 158

KL9108 / KL9116 User Manual

Panel Array Toolbar

The panel array toolbar, at the lower right of the screen, provides shortcut
navigation and control of the panel array as described in the table below:

Note:

For issues affecting multiple user operation in Panel Array Mode, see

Multiuser Operation

, page 87.

Click and drag to move the toolbar to another position on the screen.

Pause panel scanning, leaving the focus on the panel that currently has it.

Move back four panels.

Move to the previous panel.

Move to the next panel.

Move ahead four panels.

Increase the number of panels in the array.

Decrease the number of panels in the array.

Toggle 4/3 aspect ratio.

Exit Panel Array mode.

Summary of Contents for KL9108































































































































































Search results

Summary of Contents for KL9108

Reviews:

Related manuals for KL9108

Brands by name

Popular brands

Altusen KL9108, User Manual

Search results

Summary of Contents for KL9108

Reviews:

Related manuals for KL9108

Brands by name

Popular brands