Altusen KL9108 User Manual Download Page 4

Page: 4 / 158

KL9108 / KL9116 User Manual

Package Contents

Basic Package

The basic KL9108 / KL9116 package consists of:

KL9108 or KL9116 Dual Rail LCD KVM Switch with Standard Rack
Mount Kit

Custom KVM Cable Sets

Power Cord

User Manual*

Quick Start Guide

Optional Equipment

Depending on any optional equipment that you may have purchased, one of the
following may be included in your package:

Standard Rack Mounting Kit - Long

Easy-Installation Rack Mounting Kit - Short

Easy-Installation Rack Mounting Kit - Long

Check to make sure that all of the components are present and in good order.
If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the switch or to any other
devices on the KL9108 / KL9116 installation.

Changes may have been made to the manual since it was printed. Please
visit our Website to check for the most up-to-date version.

2008 ATEN

International Co., Ltd.

Manual Part No. PAPE-0267-3AXG

Printing Date: 02/2008

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for KL9108































































































































































Search results

Summary of Contents for KL9108

Reviews:

Altusen KL9108, User Manual, Page: 4 / 158

Search results

Summary of Contents for KL9108

Reviews: