Altusen KL9108 Page 71 User Manual Download

Page: 71 / 158

Chapter 4. Administration

Upgrading the Firmware

As new versions of the KL9108 / KL9116 firmware become available, they can
be downloaded from our Website.

Note:

Although upgrading the firmware isn't on the OSD Administration
page, it is an administrative function, so we chose to discuss it in this
chapter.

To upgrade the firmware, do the following:

1. Download the new firmware file to a computer that is not part of your

KL9108 / KL9116 installation.

2. From that computer, open your browser and log in to the KL9108 /

KL9116 (see

Logging In

, page 61).

3. Click the

Firmware

icon (see

Webpage Icons

, page 63) to open the

Firmware configuration

dialog box:

4. Click

Browse

; navigate to the directory that the new firmware file is in

and select the file.

5. Click

Upgrade

6. After the upload completes, click the

Logout

icon to exit and reset the

KL9108 / KL9116.

Summary of Contents for KL9108































































































































































Search results

Summary of Contents for KL9108

Reviews:

Related manuals for KL9108

Brands by name

Popular brands

Altusen KL9108, User Manual

Search results

Summary of Contents for KL9108

Reviews:

Related manuals for KL9108

Brands by name

Popular brands