32
Fascias and Capping
10
Finish fixing the capping through the remaining holes. Once fixed in place you can trim any excess
felt. Be very careful not to cut through both layers of roof felt. Scoring down the side of the capping
a couple of times lightly is much safer than trying to cut through in one go!
Now all the capping is fitted and the felt is
trimmed you can move to
section 12.
Work round the building fitting the mid capping. The capping should be fitted so it overhangs the
fascia slightly. Again all of these caps should be fitted with a 50mm countersunk screw at the
bottom of the capping only.
Once all the corner
capping pieces are in
position space the
tops out evenly and
fix into position.
Diagram 54
Diagram 53
