8
Floor Assembly
3
Check that the edges of the floor are in line before drilling pilot holes through the floor board in line
with the noggin. Then fix with 60mm passivated screws (diagram 8). Its is crucial to get the floor flat
and level as this will affect how your building goes together and how well your windows and door
will operate.
Finally line up the other end section of flooring, before sliding this onto the noggins make a small
mark on the floor board on the centerline of the noggin. This is to help you get the fixing screw in
the correct position. Once you have made the marks at each position you can slide the floor section
onto the noggins of the middle sections.
Diagram 7
Diagram 8
