9
The positioning of the side panels is entirely flexible and can be
decided as you fit them, so for example if you want an opening
window in the rear corner of the building you can. This instruction
manual will show the standard layout.
Take the first panel and position it at the rear of the building, get a
helper to hold this in place while you position the next panel
(diagram 9).
Diagram 9
ABA0027
Floor Assembly
3
Drill pilot holes with the 4mm
drill bit supplied at each point
shown by the arrows on
diagram 10. Make sure the
panels line up perfectly on the
inside (diagram 11) before
fixing with 60mm passivated
screws.
When you screw the two
panels together you may find
the screw pulls the other panel
in too far, you can prevent this
by off-setting the two panels
slightly and then the screw will
pull them together.
Dia. 11
ABA0027
Diagram 10
Do
NOT
fix the side
panels to the floor yet
as this will make
construction hard later
in the build.
