11
5.2. Delay Menu
Use this menu to work on the systems delay lines.
In these pages, the number of the parameters and how they are presented varies according
to the configuration of the PRESET and according to
settings (
Units
UTLITY
menu). In fact, these pages only show
the parameters that can actually be used, in the most suitable form of editing.
Parameters
Input Delay
Delays the signal of an input (or the sum of the inputs) before sending it to the
processor.
EQ
In this way, all the outputs which depend on that input are delayed by the same length of time. Also called
Master
Input Delay is mainly used to compensate for the effects
Delay,
due to the distance between the various
speaker enclosures or between various blocks of a complex sound system (for example in large concert halls,
INA DELAY
INB DELAY
Parameters
menu
DELAY
Parameters
stadiums, etc.), Thus achieving virtual alignment.
Press
The
page appears, by means of which it s possible to edit the name of the
ENTER.
PRESET Naming
PRESET to be saved.
The name of the 'start' PRESET (i.e. of the PRESET currently loaded) is proposed as default. The cursor takes up
position on the first of the twelve character spaces available.
P r e s
m
n
i
N a
e t
g
* D e f a u l t *
If you want to abort
procedure (for example because you've chosen the wrong memory area) and
Naming
At this point:
If you decide to accept and confirm the name suggested, press
ENTER.
return to Store PRESET procedure, press
.
ESC
If you want to assign a new name to the PRESET you're storing:
- use the
and
keys to position the cursor on the required character
- use
to enter the alphanumeric value wanted
DIAL
- after finishing, press
ENTER.
P r e s
m
n
i
O P
N a
e t
E R H A
L
1
g
L
