Alto-Shaam Converge CMC-H2H Operator'S Manual Download Page 26

Page: 26 / 104

NSTALLATION

Converge®

▪

Operator’s Manual

▪

MN-47238

▪

Rev 1

▪

8/22

Continued from previous page

Installing the water

supply

To install the water supply, do the following.

Step

Action

Flush

the water line at the installation site.

Install

adequate backflow protection to comply with applicable federal, state,

and local codes.

Remove

the two adapter fittings on the water inlets.

Apply

thread sealant to the threads of the adapter fittings.

Install

the elbow from the kit onto the adapter fitting.

Install

the adapter fittings and elbows onto the water inlets with slip joint

pliers.

Tighten

the fittings until the elbows have a slight downward angle.

Continued on next page

CT-TS-012056

Untreated

Treated

CT-TS-012059

CT-TS-012062

Untreated

Treated

Summary of Contents for Converge CMC-H2H









































































































Search results

Summary of Contents for Converge CMC-H2H

Reviews:

Related manuals for Converge CMC-H2H

Brands by name

Popular brands

Alto-Shaam Converge CMC-H2H, Operator'S Manual

Search results

Summary of Contents for Converge CMC-H2H

Reviews:

Related manuals for Converge CMC-H2H

Brands by name

Popular brands