Alto-Shaam Converge CMC-H2H Operator'S Manual Download Page 70

Page: 70 / 104

PERATION

Converge®

▪

Operator’s Manual

▪

MN-47238

▪

Rev 1

▪

8/22

How to Update Software with a USB Drive

Before you begin

Make sure:

▪

The oven is on, but not in a cooking mode.

▪

You will need a USB drive with the updated software. To download the most up to

date oven software and register for email notifications when new software

versions are released, please visit https://www.alto-shaam.com/en/customer-

support/software-downloads.

▪

Do not remove the USB drive during the update process.

Procedure

To update the software, do the following.

Step

Action

Touch

the menu icon

. The menu screen displays.

Touch

the “Settings” icon

. The “General Settings” screen displays.

Plug

the USB drive

into the port.

Continued on next page

CT-TS-014846

CT-TS-014849

VMC-TS-007852

Summary of Contents for Converge CMC-H2H









































































































Search results

Summary of Contents for Converge CMC-H2H

Reviews:

Related manuals for Converge CMC-H2H

Brands by name

Popular brands

Alto-Shaam Converge CMC-H2H, Operator'S Manual

Search results

Summary of Contents for Converge CMC-H2H

Reviews:

Related manuals for Converge CMC-H2H

Brands by name

Popular brands