Alto-Shaam Converge CMC-H2H Operator'S Manual Download Page 37

Page: 37 / 104

NSTALLATION

Converge®

▪

Operator’s Manual

▪

MN-47238

▪

Rev 1

▪

8/22

Continued from previous page

Connect

the supply cord to the appropriate terminals (L1, L2, L3, etc.) in

accordance with local codes and regulations.

Install

the ground wire

Leave

an extra loop

so that current-carrying conductors become taut

before the ground wire if the cord is accidentally pulled. Follow applicable

regulations.

Re-install

the main disconnect switch.

Re-install

the mounting bracket.

10.

Re-install

the top cover.

Press reset button(s)

11.

Press

and

release

the high limit temperature reset button(s)

Result

The oven is now installed and ready to be used.

CT-TS-012047

CT-TS-012050

Summary of Contents for Converge CMC-H2H









































































































Search results

Summary of Contents for Converge CMC-H2H

Reviews:

Related manuals for Converge CMC-H2H

Brands by name

Popular brands

Alto-Shaam Converge CMC-H2H, Operator'S Manual

Search results

Summary of Contents for Converge CMC-H2H

Reviews:

Related manuals for Converge CMC-H2H

Brands by name

Popular brands