Altigen Alti-IP 600H Phone Administration Manual Download

Page: 14 / 69

Alti-IP 600H Manual

Note:

indicates a normal operating mode key feature, which is only

available after registering the Alti-IP 600H with the phone server
and logged in as an extension.

Hardware Components

The following hardware items are included in this package:

• Alti-IP 600H Set

• Phone receiver

• AC Adapter (Input: 100-240V; Output: DC 5V, 2A)

• Power cord

• Network cable

New in Version Level 12XX

•

Configurable BLF ringer

•

Distinctive ringing support

•

Activity display

•

Auto answer mode

•

Workgroup queue status display

RELEASE

Releases a call.

ICOM*

Incoming voice path through speaker, indicated by
the button’s blinking indicator light.

CONF*

Initiates a conference call, indicated by the button’s
blinking indicator light.

XSFR*

Transfers a call, indicated by the button’s blinking
indicator light.

HOLD*

Places a call on hold, indicated by the button’s
blinking indicator light.

Receiver
Jack

Connects to receiver.

Summary of Contents for Alti-IP 600H Phone






































































Search results

Summary of Contents for Alti-IP 600H Phone

Reviews:

Related manuals for Alti-IP 600H Phone

Brands by name

Popular brands

Altigen Alti-IP 600H Phone, Administration Manual

Search results

Summary of Contents for Alti-IP 600H Phone

Reviews:

Related manuals for Alti-IP 600H Phone

Brands by name

Popular brands