Altigen Alti-IP 600H Phone Administration Manual Download | Manualshive

Page: 2 / 69

background image

WARNING!

Toll fraud is committed when individuals unlawfully gain access to
customer telecommunication systems. This is a criminal offense.
Currently, we do not know of any telecommunications system that is
immune to this type of criminal activity. AltiGen Communications, Inc.
will not accept liability for any damages, including long distance charges,
which result from unauthorized and/or unlawful use. Although AltiGen
Communications, Inc. has designed security features into its products, it is
your sole responsibility to use the security features and to establish security
practices within your company, including training, security awareness, and
call auditing.

NOTICE

While every effort has been made to ensure accuracy, AltiGen
Communications, Inc. will not be liable for technical or editorial errors or
omissions contained within the documentation. The information contained
in this documentation is subject to change without notice.

This documentation may be used only in accordance with the terms of the
AltiGen Communications, Inc. License Agreement.

AltiGen Communications, Inc.
4555 Cushing Pkwy.
Fremont, CA 94538
Telephone:    510-252-9712
Fax:               510-252-9738
E-mail:          [email protected]
Web site:      www.altigen.com

TRADEMARKS

AltiGen, AltiServ, AltiWare, AltiSpan, AltiReach, AltiLink, AltiConsole,
AltiAdmin, Alti-IP 600H, Zoomerang, IPTalk, AltiReport, and SuperQ are
trademarks or registered trademarks of AltiGen Communications, Inc.

All other brand names mentioned are trademarks or registered trademarks
of their respective manufacturers.

Copyright © AltiGen Communications, Inc. 2005. All rights reserved.
Printed in U.S.A. 05/2005 4290-0010-5.0A

«
1
2
3
4
...
»

Summary of Contents for Alti-IP 600H Phone






































































Reviews:

No comments

Related manuals for Alti-IP 600H Phone

Brand: 2N Pages: 32

Brand: Rath Pages: 9

Brand: Hammer Pages: 11

Aastra 480i SIP

Brand: ADTRAN Pages: 29

Brand: Micromax Pages: 29

Brand: SouthernLINC Pages: 63

Brand: NAPCO Pages: 16

Brand: Samsung Pages: 166

Brand: Samsung Pages: 224

Brand: Samsung Pages: 156

Brand: IPRO Pages: 17

Brand: myPhone Pages: 41

Brand: Sanyo Pages: 2

vertis 4001 you

Brand: Overmax Pages: 26

Brand: Panasonic Pages: 37

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 38

Brand: Panasonic Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands