Altigen Alti-IP 600H Phone Administration Manual Download

Page: 19 / 69

Alti-IP 600H Manual

H A P T E R

Installation

These steps describe procedures for installing and configuring the Alti-IP
600H locally — through manual setup or plug and play. To install and
configure the phone remotely, refer to “Remote Installation” on page 18.

Manual Setup

To manually set up the Alti-IP 600H phone, perform the following steps:

Network Setup

Find out the settings for the following (this information will be needed
later to configure the Alti-IP 600H):

•

AltiWare Server IP Address

•

DHCP

- if DHCP is not used, obtain the Alti-IP 600H phone’s IP

address from the System Administrator.

•

Gatekeeper Auto Discovery

- if gatekeeper auto discover is not

used, obtain the AltiWare IP address.

•

Firewall

- Refer to “Firewall Considerations” on page 40.

AltiAdmin/ACM Admin Setup - AltiGen IP Phone Configuration
Window

To configure the Alti-IP 600H phone with AltiAdmin/ACM Admin,
select

AltiGen IP Phone Configuration

from the

Management

menu.

Summary of Contents for Alti-IP 600H Phone






































































Search results

Summary of Contents for Alti-IP 600H Phone

Reviews:

Related manuals for Alti-IP 600H Phone

Brands by name

Popular brands

Altigen Alti-IP 600H Phone, Administration Manual

Search results

Summary of Contents for Alti-IP 600H Phone

Reviews:

Related manuals for Alti-IP 600H Phone

Brands by name

Popular brands