Altendorf WA 6, Operating Manual

Page: 56 / 76

Operating
56
Operating
0000010064-007- GB
7.5.4 Saw blade recommendation
WARNING!
After the saw blade change, attach a suitable riving knife (see riving knife) and
adjust the riving knife!
• The distance of the riving knife from the gear rim must be set to between 3
mm and 8 mm.
• The highest point of the riving knife (saw blade protection hoods attached
separately from the riving knife) must be set to between 0 and 2 mm under
the topmost tooth.
• The riving knife must be at least 0.2 mm thicker than the main saw blade.
Material
n
[rpm]
Rough cut
D = 250 mm
Rough cut
D = 315 mm
Finished cut
D = 250 mm
Finished cut
D = 315 mm
Softwood, lengthwise 4200 24 F 28 WS 40 WS 48 WS
Softwood, crosscut 4200 40 WS 48 WS 48 WS 60 WS
Hardwood, lengthwise 4200 24 WS 28 WS 40 WS 48 WS
Hardwood, crosscut 4200 40 WS 48 WS 48 WS / 80 G5 60 WS /100G5
Veneer 4200 60 WS 72 WS 80 WS / 80 G5 96 WS /100G5
Pressed laminated
wood
4200 40 WS 48 WS 48 WS 60 WS
Coreboard 4200 48 WS 60 WS 60 WS / 80 G5 72 WS /100G5
Plywood 4200 40 WS 48 WS 60 WS / 80 G5 72 WS /100G5
Raw chipboard 4200 48 WS 60 WS 60 WS 72 WS
Coated chipboard 4200 60 TF 72 TF 80 TF 96 TF
Raw MDF boards 4200 48 WS 60 WS 60 TR 72 TR
Coated MDF 4200 60 WS 72 WS 80 TF 96 TF
Laminate flooring 4200 60 TF 72 TF 80 TF 96 TF
Hardboard 4200 60 WS 72 WS 80 WS 96 WS
PVC profiles 4200 60 TF 72 TF 48 DD / 80 G5 60 DD / 100G5