Altendorf WA 6, Operating Manual

Page: 33 / 76

Installation
33
0000010064-007- GB
Installation
6.3.3 Main table width extension
6.3.4 Rip fence
• Align the table top width extension (1) on the table top (2)
• Tighten the washer (3) with the screw (4)
• Turn the nut (5) and screw (4) into the table top width
extension (1) and use it to adjust the incline
• Tighten the nut (5)
• Tighten the measuring rail (1) using the screws (2) on the
table top (3)
• Use the screw (2) to insert the measuring rail (1) in the
table top width extension (4) and tighten it using the nut
(5) (washer (6) previously inserted)
• Remove the nuts (8) and one washer (9) each from the
round rod with bolts (7)
• Insert the round rod with bolts (7) into the table top (1)
holes intended for this purpose and tighten using the nuts
(8)
• Use the nut (8) to tighten the round rod with bolts (7) on
the table top width extension (4) (washer (9) previously
inserted)
• Push the rip fence (10) onto the round rod (7)
• Push the stop profile (11) onto the rip fence (10) and
clamp it