Altendorf WA 6, Operating Manual

Page: 26 / 76

Product description
26
Product description
0000010064-007- GB
• Tight-fitting work clothes
• Ear protection
• Safety shoes
Recommended:
• Eye protection
5.6.2 Machine safety
General:
• Ensure that the workplace is uncluttered, slip-proof and well lit.
• Replace damaged components in the saw blade area.
• Only qualified electricians are permitted to work on the electrical equipment
of the machine.
• Wobble units or wobble cutting devices may not be used.
• HS saw blades and cracked or deformed saw blades may not be used.
Prior to use:
• Before all work, ensure that the protective and working devices are
securely fitted and are not damaged.
• Before changing a tool, secure the machine against being switched on
unintentionally, e.g. by actuating the emergency stop device.
• Before rectifying any faults and carrying out repairs, secure the machine
against being switched on unintentionally, e.g. by padlocking the main
switch.
• Remove any loose parts from the vicinity of the saw blade before switching
on the machine.
• Only start cutting when the saw blade has reached its full rotational speed.
• Prior to cutting aluminium, thoroughly clean the machine and remove all
remaining chips and dust to prevent ignition of remaining chips/dust.
i
Note!
Non-adherence to the health and safety requirements may lead to accidents
and operator injuries.