14
-EN
Location of Controls
For X801D-U/INE-W997D
For X701D
Microphone
Used for Hands-free or Voice Control modes.
For X701D, the microphone is built into the left side of the
monitor.
(AUDIO)/ (Voice Recognition mode) button
Displays the Audio/Visual screen. If the Audio/Visual screen is
already displayed, changes the source.
When a hands-free phone with Voice Recognition is connected,
press and hold for at least 2 seconds to switch to the Voice
Recognition mode.
(MUTE) button (X801D-U/INE-W997D only)
Press to activate/deactivate the mute mode.
/
(DOWN/UP) button (X801D-U/INE-W997D only)
Press to adjust the volume.
(Favourite) button
Recalls the Favourite screen.
• Press and hold this button for at least 2 seconds to switch to
the Climate screen. (displayed only on the X801D-U/INE-
W997D when connected to the optional CAN Interface box .)*
• Press and hold this button for at least 2 seconds to switch to
Vehicle info mode. (X701D only)*
*
For details, see “About Vehicle Interlock Function” (page 87).
MENU/ (Power Off) button
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn the
power off.
/
button
Press to seek down/up a station in radio mode or down/up a
track, chapter, etc., in other audio/visual sources.
RESET switch
The system of this unit is reset.
(NAVI/NAV) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to Go
Home route screen. (If Home is not set yet, it will change to the
Home setting screen.)
For details of navigation operations, refer to “Navigation System
OM” in the CD-ROM.
Remote Sensor
Point the remote control transmitter towards the remote sensor
within a range of 2 meters.
(CAMERA) button (X701D only)
Use to display the camera image.
Disc Slot (X701D with DVE-5300X only)
Rotary encoder/MUTE button (X701D only)
Adjust the volume by turning to the left or right.
Press to activate /deactivate MUTE mode.
(Eject) button (X701D with DVE-5300X only)
Ejects a disc.
Getting Started
Optional Remote Control Interface Box
This unit is operable using the vehicle’s secondary radio controls. An
Alpine Remote Control Interface Box (optional) is required. For
details, contact your Alpine dealer.
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote control sensor.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in bold
(e.g. MENU). The buttons found on the touch-screen display are
shown in bold within brackets, [ ] (e.g.
[
]
).
