19
-EN
If a menu screen appears
On DVDs and Video CDs with playback control (PBC), menu
screens may appear automatically. If this happens, perform
the operation described below to start playback.
Direct Menu Operations (DVD only)
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the
disc.
Menu Operations (DVD only)
1 Touch
[KEY]
.
The menu operation mode will be displayed.
2 Select a desired menu item by touching
[
8
]
,
[
9
]
,
[
;
]
or
[
:
]
.
3 Touch
[ENTER]
to confirm the selected item.
Continued
To display the DVD mode screen
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
Caution
• Not all functions will operate for every DVD. See
the individual DVD’s instructions for details on
the features supported.
• Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc
and check for fingerprints on the playback side.
Clean the disc if necessary.
• If you switch the power or Ignition Key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
• If you try to perform an invalid operation (based
on the type of disc being played), the following
mark is displayed on the monitor screen:
• Play Position Memory Function
Even if you turn power off or switch the Ignition
Key to OFF during playback or change the
source, playback will continue from the point
where playback stopped when the power is
turned ON again.
1
Touch
[SRC]
on the main source screen.
The source selection screen is displayed.
2
Touch
[DVD PLAYER]
.
The display shows the DVD player mode screen.
Insert a disc with the label side facing up. The unit starts
to play the disc.
When an optional Alpine DVD player is connected:
Insert a disc into the DVD/video CD/CD player, the player
starts playing.
• The operation screen changes to the visual screen in the DVD or
video CD mode for 5 seconds after an operation has been
performed. Touch the display panel to display the operation screen
again.
• The display mode can be changed by touching
[WIDE]
.
For operation, see “Switching Display Modes” on page 25.
To eject the disc
Press
c
.
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• DO NOT insert discs containing maps for the navigation system.
Doing so could result in damage.
• Refer also to “DVD Setup” (pages 27 to 30).
• If
:
(playback symbol) is displayed when a video CD with PBC
(Playback Control) is inserted, playback is enabled by touching
and holding
[
:
/
J
]
for at least 2 seconds.
• Be sure the remote input lead is connected to the remote output
lead of this unit when a DVD changer or DVD player is connected.
If not correctly connected, touch operation cannot be performed.
• To return to the previous screen during video CD playback, touch
[
;
]
after touching
[P1/2]
of the function guide. However, the
function may vary depending on the disc.
