32
-EN
Receiving Announcement Information of DAB Local Stations
Setting item: DAB REGIONAL
Setting content: OFF / ON
ON:
You can automatically receive the announcement
interrupt of the regional you are currently in.
OFF:
Announcement interrupt is valid for all religions.
• Use this function when the DAB Receiver Box is connected.
Setting for Automatic Change from DAB to RDS
When the DAB reception is poor, you can set this selection ON to
automatically change to the RDS station (a station that can be
received) within the same broadcasting station until good reception is
achieved. You can switch this for voice only (except Service label/
Dynamic label display). The display and operation remain as for
DAB.
Setting item: AUTO SW FROM DAB TO RDS
Setting content: OFF / ON
• Use this function when the DAB Receiver Box is connected.
Switching the Display Language of PTY (Programme Type)
You can select one of the patterns of the display languages. When the
optional DAB Receiver Box is connected, the setting is mutually
affected for both equipment.
Setting item: PTY LANGUAGE
Setting content: GB / NL / F / D / I / E
Switching the incoming calls of the telephone
This operation can be carried out only when a cellular phone and
MobileHub (CXA-B200NK) is connected.
Setting item: PHONE RECEIVE
Setting content: AUTO / MANUAL
• The incoming call can be switched to Automatic Calling or Manual
Calling.
Playing MP3/WMA Data
When using discs containing both audio data and MP3/WMA data.
Setting item: PLAY MODE
Setting content: CD / MP3
CD:
Plays only the audio data on discs containing both audio
data and MP3/WMA data.
MP3:
Plays only the MP3/WMA files on discs containing both
audio data and MP3/WMA data.
• Remove the disc from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot
be applied.
SYSTEM Setup
System Setup Operation
The Parking Brake must be engaged to access the System
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.
1
Touch
[SYS.]
on the main source screen.
The SYSTEM selection screen is displayed.
2
Touch
[SETUP]
.
The SETUP screen appears.
3
Touch
[
]
of SYSTEM SETUP.
The SYSTEM setup screen appears.
4
Touch
[
;
]
or
[
:
]
of the desired item to change its
setting.
Setting items:
IN INT. MUTE / IN INT. ICON / NAV. IN / NAV. MIX /
EXPANSION BOX
*
1
/ VISUALIZER
*
2
/ AUX IN-1 /
AUX IN-2
*
2
/ AUX IN-3
*
2
/ MONITOR OUT-1 / MONITOR OUT-
2
*
2
/ CAMERA IN / V.SEL KEY / ILLUMINATION COLOR (IVA-
D300R only) / A. PROC TYPE
*
1
The setting is effective when the external expansion box (VPE-
S431) is connected.
*
2
Displayed when the expansion box is set to ON.
5
Touch
[RETURN]
to return to the previous screen.
Touch
[MAIN CONT.]
to return to the main source screen
that was displayed before the setup operation was
started.
• Immediately after inputting titles or changing the settings of
System Mode (While the system is inputting the titles or data
automatically) do not turn the ignition key (engine key) to OFF.
Otherwise, a title may not be written, or the settings may not be
changed.
Setting the External Device Interrupt Mode
If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the
IVA-D300R/IVA-D300RB, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to the
voice guidance of your navigation system when it occurs even while
you are playing a CD or DVD. The CD/DVD player will be
automatically muted during voice guidance. For further details, please
refer to the manual for NVE-K200.
Setting item: IN INT. MUTE
Setting content: OFF / ON
OFF:
The volume level can be adjusted in Interrupt mode.
ON:
Sound will not be output. The icon that is set in “Setting
the Interrupt Icon Display” is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it
manually.
