41
-EN
Data Download
About SOUND SETUP Download
You can download data (from Alpine’s website) to a CD-R/CD-RW or
HDD, and download and store the data to the IVA-D300R/IVA-
D300RB.
To start SOUND SETUP download, access the URL below and follow
the on-screen instructions.
http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au
Downloadable data
The file name of download data shall be
“A_U*****.MP3.”
A_U
∗∗∗∗∗
.MP3
Extender (fixed)
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
• For details about procedures of download, see ALPINE’s web site.
• If a external audio processor is connected, data that is downloaded
cannot be used.
Data is memorized in Preset 6 of the
Parametric EQ Mode.
Data is memorized in Preset 6 of the
Time Correction Mode.
Data is memorized in Preset 6 of the
crossover mode.
Parametric
equalizer
Time correction
Crossover
Adjusting Colour of Picture
Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the colour between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Colour adjustment can be made only in the navigation, DVD,
AUX1 and AUX2 modes.
• Colour adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Adjusting Tint of Picture
Setting item: TINT
Setting content: G15 ~ R15
Adjust the colour from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each colour.
• Tint adjustment can be made only in the navigation, DVD, AUX1
and AUX2 modes.
• Tint adjustment cannot be made if a Navigation system with the
RGB feature is connected.
• When setting PAL, you cannot adjust the TINT.
Adjusting Image Contrast
Setting item: CONTRAST
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15.
“HIGH” and “LOW” appear as the maximum and minimum
values specified.
Adjusting Picture Quality
Setting item: SHARP
Setting content: -15 to +15
Adjustment of picture quality is done in the range of -15 to
+15. “HARD” and “SOFT” appear as the maximum and
minimum values specified.
• Picture Quality adjustment can be made only in the navigation,
DVD, AUX1 and AUX2 modes.
• Picture Quality adjustment cannot be made if a Navigation system
with the RGB feature is connected.
Storing VISUAL EQ
You can store the settings made for “Adjusting Image Brightness,
Tint, Depth, Picture Quality and Contrast.”
Setting item: USER MEMORY
Setting content: P-1 / P-2
1 After completing “Adjusting Image Brightness, Tint,
Depth, Picture Quality, and Contrast” (this page), touch
[
;
]
or
[
:
]
of USER MEMORY and then select preset
number “P-1” or “P-2” to which the settings are to be
stored.
2 After selecting a preset No., touch
[WRITE]
.
The adjusted VISUAL EQ mode is stored by the above
operations.
• You can recall the VISUAL EQ mode stored here from P-1 or P-2
of “Selecting the VISUAL EQ Mode” (page 40).
