24
-EN
Using Preset Menu
1
Touch and hold the preset list you want to edit.
2
Select the desired option.
• Tune: plays the selected frequency.
• Save: overwrites frequency listening to currently.
• Delete: deletes frequency.
Traffic Announcement
Touch
.
The “TA” indicator lights up and the unit switches to standby mode
for the traffic announcement.
• Press the [TA OFF] button in the popup window to turn TA off.
You can also press the
button at the bottom right side of the
screen to toggle the TA feature ON/OFF.
Dynamic Range Control (DRC)
Dynamic Range Control (DRC) is a feature that maintains the radio
volume at a consistent level for convenience and improved user
experience.
1
Touch
.
2
Check the [DRC] box to turn the feature on.
When DRC is turned on, the “DRC” indicator will be lit up.
Setting the DAB Antenna ON/OFF
You can choose whether to supply power to DAB Antenna
Connector by this setting. Confirm the type of DAB Antenna (sold
separately) before installing the DAB antenna. If an active antenna
that needs power supply from this unit is used, set DAB Antenna
Power to On; if a passive antenna that does not need power supply
from this unit is used, make sure to set DAB Antenna Power to Off,
otherwise, a malfunction may occur.
1
Touch
.
2
Check the [DAB Antenna] box to turn the feature
on.
• Off (initial setting): When no DAB Antenna is connected or
the connected DAB Antenna does not need power supply
from this unit.
• On: When the connected DAB Antenna needs power
supply from this unit.
• If the “DAB Antenna error.” message is displayed on the unit, this
setting becomes invalid. For details on what to do if “DAB Antenna
error,” is displayed, see “If this Message Appears”.
Service Following - Related (soft link) Contents
On/Off
This unit will automatically switch to an alternatively available
service, if the reception quality of the current service is getting poor.
1
Touch
.
2
Check the [Soft Link] box to turn the feature on.
• Soft Link setting OFF [default setting]:
The Service Following to only Hard Link services is active.
Hard Link services do provide the same content than the originally
tuned service.
• Soft Link setting ON:
The Service Following to both, Hard Link and Soft Link services is
active.
Soft Link services do usually provide related content to the
originally tuned service, however the content might also be
different depending on broadcasters’ configuration.
Sound Settings
Touch
→
[Sound Settings]
For details, refer to the “Sound” on page 65.
