12
-EN
Getting Started
Components and Features
INE-W611D
〇①〇
Sound Settings or Eject button
Displays the [Tone/Fader/Balance] settings screen.
Press and hold this button to eject Disc.
〇②〇
or VOICE button
Depending on the connected smartphone, press to recall Siri
function or voice recognition mode.
〇③〇
(NAV) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to
Go Home route screen. (If Home is not set yet, it will change to
the Home setting screen.)
For details of navigation operations, refer to “Navigation System
OM (Owner's Manual)” in the CD-ROM.
Recalls the connected smartphone’s map screen.
Depending on the smartphone, this function may not be available.
〇④〇
ALL MENUS or (Power Off) button
Recalls the All Menus screen.
Press and hold this button for at least 2 seconds to turn the power off.
〇⑤〇
(AUDIO) or
(MUTE) button
Displays the Audio/Visual screen.
When pressed and held, mutes the volume.
〇⑥〇
+
/ − button
Press to adjust the volume.
〇⑦〇
Remote Sensor
Point the remote control transmitter towards the remote sensor
within a range of 2 metres.
〇⑧〇
Disc insert slot
Inserts/ejects discs
〇⑨〇
RESET switch
The system of this unit is reset.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in bold
(e.g. MENU). The buttons found on the touch-screen display
are shown in bold within brackets, [ ] (e.g. [×]).
Turning Power On/Off
Some of this unit’s functions cannot be performed while the is vehicle
is in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last screen that was
displayed before the ignition key was turned off. For example,
if the unit is in radio mode when ignition is turned off, it will
remain in radio mode when ignition is turned back on.
2
Press and hold the ALL MENUS/ (Power Off) button
for more than 2 seconds to turn the power off.
• The unit can be turned on by pressing any button.
Turning the System On
With the Alpine system, the home screen is displayed automatically
when the ignition key is turned to ACC or ON.
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 9 languages.
• Some of this unit’s functions cannot be performed while the
vehicle is in motion. Be sure to stop your vehicle in a safe location
and apply the parking brake before attempting these operations.
①
⑧
⑦
⑨
②
③
④
⑤
⑥
