21
-EN
RDS Operation
Traffic Announcement
Touch
.
The “TA” indicator is displayed and the unit switches to standby
mode to receive traffic announcements.
When a traffic announcement is received, the “TP” indicator lights
up and a corresponding popup is displayed. Press [Close] to close.
Press [TA Off] to turn the TA feature off.
• The “TP” indicator lights up during standby mode off in a condition
other than radio source to indicate that the unit is receiving the
traffic announcement.
•
If the traffic announcement broadcast signal falls below a certain
level, the unit remains in the receiving mode for 1 minute.
Receiving Traffic Information Manually
1
Touch
to turn on the Traffic Information
mode.
The “TA” indicator lights up.
2
Touch
or
.
Seeks the broadcast station which is broadcasting the traffic
information.
•
You can seek the traffic information in DX Seek mode.
Turning AF (Alternative Frequencies)
On or Off
The RDS (Radio Data System) is a radio information system using
the 57 kHz subcarrier of regular FM broadcasts. The RDS allows
you to receive a variety of information such as traffic information,
station names, and to automatically re-tune to a stronger transmitter
that is broadcasting the same programme.
1
Touch
.
2
Check the [AF] box to turn the feature on.
When AF is turned on, the “AF” indicator will be lit up.
• RDS mode is not displayed for the MW or LW band.
• When the AF is turned on, the unit automatically tunes to a strong
signal broadcast in the AF list.
• Turn the AF off when automatic re-tuning is not required.
Regional Stations
This feature allows users to lock-down the device to their
current region or allow the radio to tune into other region specific
programming.
1
Touch
.
2
Check the [Regional] box to turn the feature on.
When Regional feature is turned off, the unit automatically
keeps receiving the local RDS station.
Sound Settings
Touch
→
[Sound Settings]
For details, refer to the “Sound” on the page 65.
