![Alphasmart NEO User Manual Download Page 132](http://html.mh-extra.com/html/alphasmart/neo/neo_user-manual_2906391132.webp)
124
Neo User’s Guide
When I attach my Neo to my computer, I can’t send any data,
and my Neo screen shows a file instead of the “Attached
to…” message.
Check these three things:
•
Examine the cable connections—one may be loose.
•
Plus your USB cable into a different USB port on your computer.
•
Close AlphaSmart Manager, if it’s running. You can’t send text to
an application on your computer when AlphaSmart Manager is
running.
When I turn on my Neo, I see something other than the file
that I expected.
Your Neo places you wherever you were last working when you
turned the device off. If you were working in File 4 of AlphaWord Plus,
it will place you in that file. If you were in Control Panel, it will place
you in that SmartApplet. If you were working on calculations in
Calculator, it will place you in Calculator with your last figures
showing.
The exception to this behavior is when you’ve set a startup
SmartApplet. When you designate a startup SmartApplet, that
SmartApplet is the application that you see first each time you turn
your Neo on.
If you’re in AlphaWord Plus, but not seeing the text you expect, make
sure you’re in the correct file. To change files, press
file 1
to go to
File 1,
file 2
to go to File 2, and so on, or use the File Selector or
Open File.
Summary of Contents for NEO
