21
We reserve the right to modify technical specifications without prior notice.
83054300dUK
© ait-deutschland GmbH
Stick the heating and heat pump regulator's control
cable into the
right
bushing on the bottom of the
control element…
NOTICE.
A connection to a computer or a network can
be installed via the left bushing on the bottom
of the control element, allowing the heating and
heat pump regulator to be controlled remotely.
One pre-condition is that a screened network
cable (category 6) be installed through the unit
when installing the unit.
Operating manual for the heating and heat pump
regulator, version "Qualified technician", “Web
server” section.
If this network cable is available, insert
the network cable's RJ-45 plug into the left
bushing of the control element.
NOTICE.
The network cable can be exchanged at any
time. In order to be able to connect it, the
screen must first be removed.
Installation and removal of the
screen
INSTALLING THE SCREEN
NOTICE.
The screen is provided at the time of delivery so
that the control element may be inserted in the
upper recesses of the front facade.
If the control element has been inserted in the
lower recesses of the front facade, you must
first remove the screen's temporary cover and
then reinsert it above the logo.
Screen at time of delivery:
1 recess for control element
2 logo
3 temporary cover
Proceed as follows:
First, insert the screen
below
, in the provided
slots on the front of the facade…
