12
We reserve the right to modify technical specifications without prior notice.
83054300dUK
© ait-deutschland GmbH
Rotate the already-interlocked parts by 90° once
again and set up the final connection…
Stabilise the wall duct from the inside using the
chipboard included with delivery…
Install the wall duct in the masonry
from the
house exterior
. This can either be done during
the construction phase (by means of sealing)…
NOTICE.
Mount the wall ducts 1 cm above the finished
outer facade.
1 Masonry of the house exterior
2 Insert the wall duct in the
masonry (1 cm above the
finished outer facade)
or retrofit (using foam in the masonry):
1 Finished outer facade
NOTICE.
Wall ducts fix wall openings, help avoid cold air
transmission in the masonry as well as assist in
the assembly of weather / rain guards and wire
mesh grilles
AIR DUCTS ASSEMBLY
Proceed as follows:
Remove the parts necessary for the assembly of the
air duct(s) from their respective boxes…
The interlocking of the air ducts is carried out
as described in the section – entitled "Wall
duct(s) assembly".
SECURING THE AIR DUCT INTO THE WALL DUCT
Proceed as follows:
Pull the roll seal included with delivery over the end
of the air duct…
Push this end of the air duct into the wall duct.
