44
2.8.1
Enable/Disable Rate Control
In the following page, you can enable/dis able the rate control function on a per port basis. Use the
Enable option to define the port(s) speed limit for forwarding traffic based on the rate value of the
ingress port. For example, traffic flows from port1 to port2 (ordinary link speed 1000Mbps for both
ports) and the rate control is enabled on port1 with rate value 50%, the actual outgoing traffic speed
on port2 will be 500Mbps (50% of 1000Mbps).
After you have selected the Enable/Disable field values, you must click the Apply button to activate
the settings.
