manualshive.com logo in svg

Alloy GSS-8T2SFP, User Manual, Page: 29 / 58

Share
Download
Alloy GSS-8T2SFP User Manual Download Page 29

 

29 

2.6.1

 

Get/Refresh the Latest Mirror Settings 

Click the 

Mirror

 menu on the web page, the latest mirror settings on the switch will be displayed.   

 

 

 

This page provides the following parameters 

n

 

Enable/Disable

 – Click the 

Enable 

option

 

to enable mirroring function or the 

Disable

 option to 

disable it. 

n

 

Mirroring Options

 – There are five options for each port: 

Ø

 

Capture

 – to set the corresponding port to be a capture (monitoring) port. 

Ø

 

Ingress&Egress

 – to set the corresponding port to be a monitored port to investigate 

bi-directional traffic.   

Ø

 

Ingress

 

Only

 – to set the corresponding port to be a monitored port to investigate only 

ingress (receiving, Rx) traffic. 

Ø

 

Egress

 

Only

 – to set the corresponding port to be a monitored port to investigate only 

egress (forwarding, Tx) traffic. 

Ø

 

OFF 

– no mirroring function for the corresponding port. This is the default option. 

Summary of Contents for GSS-8T2SFP



























































Reviews:

No comments