![background image](http://html.mh-extra.com/html/allo-com/nano-2/nano-2_user-manual_2903743040.webp)
NANO 2 – Additional Features
User Manual v2.7
www.allo.com
35
ption Time
3600
Min
Registration/Subscri
ption Time
Configure the minimum duration (in seconds) of incoming registration
and subscription allowed by the Nano2PBX. The default setting is 60.
Default
Incoming/Outgoing
Registration Time
Configure the default duration (in seconds) of incoming/outgoing
registration. The default setting is 120.
5.5.3. NAT
Navigation:
General Setting > SIP settings > NAT
: This is where you can configure the
NAT sip settings.
Email Settings
Extern IP
Configure a static address and port (optional) that will be used in
outbound SIP messages if the Nano2PBX is behind NAT.
Extern Host
you can specify an external host name, and Asterisk will perform DNS
queries periodically based on the External Refresh Interval
Extern Refresh
Configure the refresh interval for the external host (if used) The default
setting is 10.
Local Network
Address
Specify a list of network addresses that are considered inside of the
NAT network. Multiple entries are allowed. If not configured, the
external IP address will not be set correctly.
A sample configuration could be as follows: 192.168.0.0/255.255.0.0
NAT Mode
This is a global NAT setting that will affects all peers and users. The
default setting is “YES".
•
YES = Always ignore info and assume NAT
•
NO = Use NAT mode only according to RFC3581
•
NEVER = Never attempt NAT mode or RFC3581 support
•
ROUTE = Assume NAT, don't send report.
Summary of Contents for Nano 2
Page 1: ...Version 2 0...