![background image](http://html.mh-extra.com/html/allo-com/nano-2/nano-2_user-manual_2903743012.webp)
NANO 2 – Setting up Features
User Manual v2.7
www.allo.com
7
4. Setting up the Features
4.1. Configure hardware
Analog Hardware Setup & Configuration
Port Configuration:
Port Configuration allows you to manually configure Ports 5 and 6
either as FXS ports or FXO ports, which are configurable ports on the NanoPBX. That
means you can configure these ports to be either as FXS ports (to connect Analog Phones)
or FXO ports (to connect PSTN line).
Important Note:
1. After choosing the port configuration click on Update Settings Button, NanoPBX will reboot for the
changes to take effect. Once the system comes up you can use the ports as per your configuration.
2. Please make sure to disconnect incoming PSTN Line connected to the Port Number 5 and 6 before
you switch from 4FXS and 4FXO Mode to 6FXS and 2FXO Mode. It may damage your NanoPBX
Unit.
4.2. Extensions (Analog & SIP)
Extensions are the core of the NanoPBX. An extension is a number mapped to a person. So
basically, every employee that is connected to the NanoPBX should have their own unique
extension number, so that he/she can be reached, and be able to place calls.
The NanoPBX supports 2 types of Extensions: IP Extensions and Analog Extensions.
IP Extensions:
Summary of Contents for Nano 2
Page 1: ...Version 2 0...