manualshive.com logo in svg

Allo.com Nano 2, User Manual

Share
Download
Allo.com Nano 2 User Manual Download Page 39

NANO 2 – Additional Features 

 

 

User Manual v2.7                                                 
www.allo.com                                                            

34

General 

 

Bind UDP Port  

  

Configure the UDP port used for SIP. The default setting is 5060.     

Bind IP Address  

  

Configure the IP address to bind to. The default setting is 0.0.0.0, 
which means binding to all addresses.   

Enable DNS SRV 
lookups  

Select to enables DNS SRV lookups on outbound calls from the 
Nano2PBX. The default setting is “No"  

 

5.5.2. TOS  

Navigation: 

General Settings

 > 

SIP Settings > TOS

: This is where you can configure the 

TOS sip settings. 

The Details to be filled are given as: 

TOS 

 

Generate In band 
Ringing  

Configure whether the Nano2PBX should generate inband ringing or 
not. The default setting is "Never".  

• Yes: The Nano2PBX will send 180 Ringing followed by 183 Session 
Progress and in-band audio.  

• No: The Nano2PBX will send 180 Ringing if 183 Session Progress 
has not been sent yet. If audio path is established already with 183 
then send in-band ringing.  

• Never: Whenever ringing occurs, the Nano2PBX will send 180 
Ringing as long as 200OK has not been set yet. Inband ringing will 
not be generated even the end point device is not working properly  

Server User Agent  

Allows you to configure the user agent string for the Nano2PBX  

DTMF Mode  

Select DTMF mode to send DTMF. The default setting is RFC2833. If 
"Info" is selected, SIP INFO message will be used. If "Inband" is 
selected, 64-kbit codec PCMU and PCMA are required. When "Auto" 
is selected, "RFC2833" will be used if offered, otherwise "Inband" will 
be used. The default setting is "RFC2833".     

Maximum 
Registration/Subscri

Configure the maximum duration (in seconds) of incoming registration 
and subscription allowed by the Nano2PBX. The default setting is 

Summary of Contents for Nano 2
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands