![background image](http://html.mh-extra.com/html/allo-com/nano-2/nano-2_user-manual_2903743038.webp)
NANO 2 – Additional Features
User Manual v2.7
www.allo.com
33
SMTP PORT
The port number at which SMTP server is running. Generally
SMTP port No is 25
AUTH User
Authorized username of the Admin Email ID
AUTH Password
Authorized password of the Admin Email ID
Admin Emailed
Specify the Administrator Email ID.
TLS Support
TLS setting to require mail to be transmitted via a secure
connection when users correspond with specific domains and
email addresses.
5.4.4. Reboot
Navigation:
Admin Settings > Reboot
: This is where you can configure the General
Settings of the Nano2PBX
The administrator of the NanoPBX can remotely reboot the Nano2PBX by pressing the
“Reboot” button at the bottom of the System management. Once done, following screen will
be displayed to confirm reboot.
The user can re-login to the phone after POWER LED and all the six PHONE LED's turn
orange and remain stable on the Front Panel of your NanoPBX
Important Note:
Nano2PBX will take about 3 minutes time to reboot and keep patience
Rebooting the Nano2PBX results in termination of active calls
IP address of the Nano2PBX after reboot, Please check the IP Address by dialing **# from the Analog
Phone connected to FXS port of the Nano2
5.5 SIP Settings
5.5.1. General
Navigation:
SIP settings > General
: This is where you can configure the General sip
settings.
Summary of Contents for Nano 2
Page 1: ...Version 2 0...